How To Build A Home Solar Panel

« « Understanding About the Consumption of Solar Energy: How the Process Works | The Average Cost Of Solar Energy Has Been Declining Over the Past Fifteen Years » »

Saturday, November 29th, 2008 Subscribe To Our Feed

Building your own home Solar Panel is possible, if you know how! Click Here For Videos and More Information! Although solar panels manufacture is a strict quality controlled industry, you can build your own home solar panel, and see how the sun’s energy can be converted to electricity. you can build your own home solar panel by using copper - cuprous oxide, - which will transform light into electricity. You can use a thin sheet of copper to get your cuprous oxide.

Click Here For Solar Panel Videos and More Information on home Solar Panel building!

To make your own home solar panel, you will need about one square foot of thin copper plate, two alligator clips and short leads of wire, a wide mouth glass jar, tap water and salt. The use of a voltmeter, capable of measuring extremely small amount of electricity will be needed to see the end result. Building your own solar panel means you will need some sort of electric stove or hot plate to heat the copper sheeting. Place the copper sheet on the burner and turn it on high and let it sit there for about 30 minutes. As it heats, you see the plate turn colors and the heat will show the outline of the heating coil underneath the plate. As the temperature rises and it gets hotter and hotter, it will start to turn dark until the whole sheet has a dark, black coating.

When the sheet is entirely black, turn off the burner and let it sit to cool for about 20 minutes. As the the cuprous oxide cools the black coating will begin to pop off the sheet, leaving a thinnish coating of red on the copper. This red coating is needed to build your own solar panel, and while the majority of the black can be rinsed off under running water, it should not be brushed clean.

Salt Water Helps Produce The Electricity for your home solar panel: Using the alligator clips, connect the copper sheet to one the top of one side of the glass jar. Now it is time to attach another clean copper sheet to the other side of the jar. Combine 2 tablespoons of salt with hot water - from tap - mix well, and carefully pour into the jar. Take care that the water does not get on the alligator clips. The two copper sheets should be under water with about one inch left exposed at the top of the car to build your own solar panel.

Now you are getting closer to your home solar panel. As carefully as you can, now put the whole apparatus into the sunlight, either via a window or place it outside - expose it to the sun. If you were able to build your home solar panel, you can see the meter indicate the power being generated by sunlight. Using the voltmeter connect the leads to the two alligator clips. Now the sun’s energy from your solar panel is yours to use! You can feel good!!! Click Here For Videos and More Information

Like this post? Publish It On Your Own Blog

Share and Enjoy: